For this challenge, I want you to use the
Texture Pressing technique on a stamping project. This technique is totally out of my comfort zone and that is part of the reason I chose to experiment with it. I hope you will have fun trying it.
In the tutorial, she uses whipped spackle, but I used both Liquidex Modeling paste and Inka Gold paste and got nice results. So I would just try whatever you have on hand that might work.
Also, I do not have special tools for my pastes, so I just used an old credit card.
Tips from my experiments:
For the modeling paste, I found that you really needed to use a very very thin coating to get a nice impression. This is the same advice given in the video tutorial. The colored ink on the stamp worked best for me with this one.
For the Inka Gold, it was significantly more flexible process. I could use a thicker layer of the pate. If I got a bad impression the first time, I was able to smooth it back out and try again. For the Inka Gold, the colored ink worked, but it looked a little better to me to just stamp with Versamark. YMMV.
Remember to clean your stamps very well pretty quickly after using with the pastes.
I will be posting some examples.
_______________________________________________________________
There will be a small RAK awarded for this challenge.
New projects only, you may combine, please upload into gallery and assign keyword WF16IM and link to this thread.
Please ask any questions below and have fun!